Frequently Asked Questions
There are areas around the Costa that have been laid by local councils and builders. The issue with these areas is that the granules are being laid too thinly and quite possibly with the incorrect ratio of Polymer to granules thus causing the surfaces to break up. We carefully measure the quantities of polymer when mixing to ensure that the ratio is correct to allow the granules to stick together permanently. We also lay to a minimum depth of 15mm to ensure that the surface remains firm and stands up to normal wear and tear.
No dose adjustment of Lotrel is required in patients with creatinine more information.
Wet Pour does not promote bacteria or fungus of any type.
Generally we will deliver and lay your surface within 6 weeks of receipt of your deposit.
Active Surfaces Rubber is a solid coloured granule composition which will leave a smooth textured surface which is soft and cool to walk on in all weathers.
Active Surfaces Rubber can be Jet washed with no chemicals required. We recommend that any trees close to the area are kept back as sap can damage the surface if left unattended. Even sap can be cleaned off provided this is carried out on a monthly basis.
Our sales team will visit your home or work place and go through your requirements in great detail. Generally the cost will compare favourably with ceramic tiling. We will survey the area to be covered and you will receive an instant quotation.
Active Surfaces Rubber is available in more than 19 coloured EPDM granules Reds, Greens, Greys, Yellow, Blue, Brown, Purple, Beige, White, Bright Red, Lime Green, Cream, Teal, Rainbow, Bright Orange and can also be mixed together to provide various effects according to your requirements. Ask our sales team to show you the full range from our samples.
why not try this out Discount fentanyl for sale Consult the following table for recommended volumes to be added to obtain solutions containing 375 mg Unasyn per mL (250 mg ampicillin Undue pressure should not be exerted during injection.
Active Surfaces Rubber requires 24 hours to set, after this time the surface is ready to use.
However he more complicated the design, the more time it will take to carry out the installation.
We can help you develop a suitable design which will match your requirements and the most efficient installation time.
We can also implement logos and graphics and games to enhance play value into the surface.
Wet pour surfacing is a mixture of rubber granules bound together by a polyurethane resin and laid on an existing tarmac, concrete, tile or MOT type 1 stone base to provide a continuous rubber surface free from seams or joints.